Heavy Duty Single Quik-Rack Mach 2
Best Bicycle Carrier that money can buy, Guaranteed! 1-1/4” Hitch CONVERTIBLE to 2” hitch with supplied adapter or, for 2” only receivers that have more bike weight carrying capacity.
After 10 years the NEW Quik-Rack Mach 2 has been completely redesigned and improved with great NEW features. Its now quikr, lighter and easier to use than the original Quik-Rack.
The Quickest Just Became "Mach 2"…QuikR, and Safer
Have a FAT TIRE Bike? The Quik-Rack Mach 2 can be used for tires as wide as 5”
Attractive multicolored scheme. With black trays and side plates, silver, red, blue and gold highlights
New trays and mount design - all of the Quik-Rack Mach 2 bicycle carriers are considered HEAVY-DUTY
The rigidity and strength of the NEW wider 45 degree tray in addition to the new design works for heavier bikes, including eBikes
Buy only the Add-ons that you need
Can be used on bikes with a wheelbase up to 58”
Weight limits for the 1-1/4” receiver are 120 lbs. and 4 bicycles maximum
Weight limits for the 2” receiver are 200 lbs. and 4 bicycles maximum
Comes with pivoting licence plate mount
New Quik-Rack custom 1 key anti-theft design works on both rack and add-ons and fits on your key chain
No tools are needed to attach the rack or add-ons
Tray latch that keeps the trays from folding during shipping and carrying
Quik-Rack shown with 1 Add-On Attached
Quik-Rack Mach 2 shown in lower pivot position for easy trunk access. The new sealed ball bearings provide a smooth easy-to-pivot function. Our old Quik-Rack was metal on metal and sometimes froze up.
The Quik-Rack Mach 2 has a patented (Patent #9902222) spring-loaded retention pin that automatically engages with the hitch receiver hole. The patented crank handle anti-wobble hitch system keeps the rack tight, safe and secure. The crank handle hitch system can be installed on your vehicle in just seconds. Just insert the rack into the receiver, then tighten the crank handle. The custom 1 key anti-theft design works on both rack and add-ons and fits on your key chain. No tools needed!
Below is the gold Anti-Wobble crank handle shown with custom silver key inserted, small key fits on any key chain
Below is the gold crank handle with gold anti-theft screw out and ready to loosen handle and remove rack from vehicle
Below is the gold crank handle loosened and ready for rack removal. No tools needed!
Below is the red Add-On latch shown locked with anti-theft key design. 1 key fits both main Quik-Rack and all Add-Ons
Below is the red latch shown ready for Add-Ons to be removed. All can be accomplished in just seconds no tools needed!
Below is the the NEW patented Quik-Rack Mach 2 spool adjusts for all common wheel sizes. Simply loosen the handle, slide the spool to the desired position then tighten the handle to lock it down. No tools needed!
Want to Add-on? Just slip the grooves on the Add-on onto the bars then lower it down. Rotate the red latches underneath, then tighten the custom 1 key anti-theft lock system. No tools needed!
Both the main rack and Add-ons fold and have a blue latch that connects them together for handling and storage.
Quik-Rack Mach 2 - vs - original Quik-Rack
Features that our original Quik-Rack did not have:
CANADA PATENT 2956005 CARRIER FOR A TWO WHEELED VEHICLE
US PATENT 9902222 CAPTIVE PIN APPARATUS FOR RETENTION OF A DRAWBAR IN A TRAILER HITCH RECEIVER
US PATENT 9956922 CARRIER FOR A TWO WHEELED VEHICLE
US PATENT 10005329 CAPTIVE PIN APPARATUS FOR RETENTION OF A DRAWBAR IN A TRAILER HITCH RECEIVER
US PATENT 10011237 BIKE CARRIER PIVOT MECHANISM
US PATENT 10059276 CARRIER FOR A TWO WHEELED VEHICLE
US PATENT 10065568 BIKE CARRIER TRAY ASSEMBLY WITH AUTOMATIC TRAY POSITION LOCK
US PATENT 10071695 SLIDING PAWL ON A RATCHET BAR
US PATENT 10086769 BIKE CARRIER TRAY ASSEMBLY WITH AUTOMATIC TRAY POSITION LOCK
US PATENT 10099525 TRAILER HITCH DRAW-BAR TIGHTENING MECHANISM
US PATENT 10106100 SECURE LATCH FOR COUPLED ASSEMBLIES
US PATENT 10124740 BIKE CARRIER WITH AUTOMATIC TRAY POSITION LOCK
US PATENT 10150424 ADJUSTABLE RETENTION ARM FOR A BIKE CARRIER
US PATENT 10167887 BEAM JOINING APPARATUS WITH BOLT AND THREADED WEDGE
THE 14 PATENTS ABOVE ALL COVER THE NEW QUIK-RACK MACH 2 DESIGN
US PATENT 6620081 EXERCISE STAND AND CENTRIFUGAL RESISTANCE UNIT FOR A BICYCLE. NOTICE OF INFRINGEMENT HAS BEEN FILED.
CAL HAS 19 PATENTS THAT COVER OTHER BICYCLE RELATED PRODUCTS FOR A TOTAL OF 33 PATENTS
All of the features above are new and not found on our original Quik-Rack.